BEYERTONE
®
www.beyertone.com
© IV-2022 BEYERTONE GmbH
Installation guide - beyertone
®
multiLAN Ver. 3
30/40
7. Operating modes and time control
To control playback of di
fferent announcements on the ‘LINE’ ports, the beyertone
multiLAN provides four operating modes: Day, Break, Night, Holiday. Switching of
operating modes can be done manually and/or automatically by schedule. The con-
figuration of the corresponding announcements is described in sections 5.2 and 5.3.
7.1 Manual switching
Switching the operating modes can be done manually on the device by pressing the
‘MODE’ button. The modes will be selected successively at each short push on the
button, and a long push (approx.. 3 seconds) will activate or deactivate automatic
switching by schedule:
MODE-LEDs
Operating mode
green
Day
green + red
Break
red
Night
yellow
Holiday
as above, but LED flashing
Automatic (schedule)
NOTE:
The mode switching by ‘MODE’-Button can be deactivated by configuration.
Via the top area of the „Mode“ screen (screenshot see next page) manual switching of
operation modes can also be done by the web configuration. The change will take effect
on saving the settings. Below that, the MODE button can be deactivated.
Another way to switch operating modes is by telephone call via the administration
menu, if at least one LINE port is connected to an analogue extension of the PBX.
Please see chapter 4.2 on how to dial in to the menu. Switching between modes can be
done through the commands given in the following table:
Entry
Function
8 + 1 / 2 / 3 / 4
Switch operating mode to Day / Night / Break / Holiday
8 + 0
Activate or deactivate automatic mode
8
Read out current operating mode (announced after approx. 3 s)
