BEYERTONE
®
www.beyertone.com
© IV-2022 BEYERTONE GmbH
Installation guide - beyertone
®
multiLAN Ver. 3
37/40
NOTE:
If you change the network parameters, you have to reboot the appliance for the
new settings to become effective. To access the appliance via a browser after
rebooting, you will, of course, have to use the new IP address, where this has changed.
If you choose to reset all your settings when rebooting, the appliance will return to the
factory settings (see Section 10).
NOTE:
When resetting the appliance to the factory settings, the date/time settings, the
user password and any licence codes stored will NOT be reset. The contents of the
memory also remain intact. You should therefore erase the memory locations in use
separately, if necessary.
9.4 Updates and licence code
You can load new firmware on the appliance from the 'System / Update' menu. Please
use only files released by BEYERTONE for the beyertone
®
multiLAN. Where updates
are provided in the form of several files in a zip archive, please be sure to unzip the
archive and then transfer the files to the appliance one by one. In special cases, also
CFG and/or TPL files provided from the BEYERTONE support can be transferred via
this firmware upload dialogue.
An update of the firmware can also be done via download. To do this, start the update
directly from the
‘Server’ area of the ‘Update’ page or - if enabled here - by pressing the
'UPDATE‘ button for 10 seconds during normal operation of the device. Information on
the availability of updates can be found in Section 12.
Some optional appliance functions may not be available as standard and need to be
enabled via a licence code. If you have purchased or received such a licence code, you
can enter and activate it on the 'Update' page. The appliance and all its basic functions
are operational without a licence code.
9.5 LED status indications
The LEDs ‘STATUS’ and ‘MOH’ on the front panel of the beyertone
®
multiLAN indicate
the following statuses (see Section 8 for details with respect to downloads):
LED indications
Meaning
MOH LED is flashing
MoH audio playback is in progress
STATUS LED is lit
Network connection OK
STATUS LED is flashing
Network connection not OK / no IP address
STATUS LED is off
No network
LEDs flash once alternately Appliance is reachable under default IP (below)
LEDs flash three times alt.
Appliance has been reset to factory status
LEDs flash simultaneously Internal device error
