BEYERTONE
®
www.beyertone.com
© IV-2022 BEYERTONE GmbH
Installation guide - beyertone
®
multiLAN Ver. 3
33/40
8. musiweb download
The beyertone
®
multiLAN has an integrated download function which the system uses
to download current audio files from a web server, either manually at the push of a
button on the front panel or automatically according to a schedule entered by the user.
To this end, the audio files (mp3 and/or mpm, see 'NOTE' at the end of Section 4.1)
must be made available in a named folder on a web server. They will be downloaded as
specified via http protocol. If the same music and announcement selection is to be
transferred to more than one appliance, the same folder on the web server can be
specified on all these appliances. Otherwise create different folders on the web server
for different selections.
IMPORTANT:
On the Download configuration screen you can select separately for
announcement and music, if on a successful download of at least each one new file all
files stored before in the announcement resp. music memory locations shall be deleted.
In case of deleting, after successful download the content of the memory locations will
be identically with the folder content of the web server. Otherwise, down-loaded files
with pre-determined memory location numbers (see Section 8.1) will replace existing
files on the same locations or - without number prescription - they will be stored in the
next free locations.
NOTE:
Downloaded files are not deleted from the web server.
Download settings can be entered in the 'Download' menu (see screenshot on following
page). Start by entering the 'URL' corresponding to the folder on the web server from
which audio files are to be downloaded (e.g. www.myserver.com/fol-der). Then select, if
all music or announcement memory locations shall be deleted on a successful
download of new files (see also remark above).
Next, specify how the download is to be started: manually via the 'UPDATE' button on
the front panel of the appliance (is otherwise locked) and/or automatically according to a
set schedule.
For the schedule, you can either specify an interval in minutes for your automatic
downloads or select specific weekdays for a download, which then takes place at the
time set under 'Time'.
Another way to initiate a musiweb download is by telephone call via the administration
menu, if at least one LINE port is connected to an analogue extension of the PBX.
Please see chapter 4.2 on how to dial in to the menu. Starting the download can be
done through the command given in the following table:
Entry
Function
9 9
starts a musiweb download
