Bexen Reanibex 700, Technical Manual

Page: 44 / 169

TECHNICAL MANUAL DGG 700 B
34
averagingthe heart rate
- For heart rates lower than 50 bpm, the 4 most
recent R-R intervals are used for averaging the
heart rate.
Heart rate response time - From 80 to 40 bpm: 3 secods
- From 80 to 120 bpm: 2 secondss
Alarm response time for tachycardia - 206 bpm (1 mV): 2 seconds
- 206 bpm (half amplitude): 3 seconds
- 206 bpm (double amplitude): 3 seconds
- 195 bpm (2 mV): 2 seconds
- 195 bpm (half amplitude): 2 seconds
- 195 bpm (double amplitude): 2 seconds
Capacity to reject T-waves
Rejects T-waves with a maximum amplitude of 0.7
mV
Alarms - Maximum and Minimum Cardiac frequency
- Maximum and Minimum% SpO2 (only with the
pulse oximetry option)
- VT/VF Alarm (only with the Semiautomatic
Defibrillator option)
Common mode rejection
> 100 dBs
Simultaneous use of the REANIBEX
Serie 700 with other equipment
connected to the patient
- The REANIBEX Serie 700 can be utilized
simultaneously with an electrosurgical unit. A
defect in the neutral electrode of the
electrosurgical unit does not represent any safety
risk for the patient since the device provides
protection against high-frequency burns. This
protection resides in the fact that the patient cable
is electrically isolated through a ground
connection.
Consult the Instructions for Use for the
electrosurgical unit to reduce the risk of burns in
case of a defect in this device
The simultaneous use of the REANIBEX Serie
700 with an external pacemaker and other
electrical pacers connected to the patient do not
represent any safety risk. The device could detect
the internal pacemaker pulses as QRS complexes
which results in an indication of an incorrect eart
rate.
SpO2 Pulse oximetry (Optional)