Bexen Reanibex 700, Technical Manual

Page: 133 / 169

TECHNICAL MANUAL DGG 700 B
123
5.2 ACCESORIES TEST
Patient Cable : 10 lead
Paddles : External _-_
Press any key to exit
RA LA LL RL V1 V2 V3 V4 V5 V6
?
1-
PATIENT CABLE
– Indicates the type of patient cable that is connected the unit (3,
5 or 10 lead) in the moment of carrying out the test. In the case that there is no
patient cable connected to the unit itself the word NONE will be shown.
2-
PADDLES
– Indicates the type of paddles that are connected to the unit at the
moment of carrying out the test: External paddles (EXTERNAL), Internal paddles
(INTERNAL) or Disposable paddles (DISPOSABLE). In the case that there is no
paddle connected the word DISPOSABLE will also be shown.
By means of this Test the operation of the patient cable loose lead detection circuit can be
checked. In the lower part of the screen a representation of the patient cable leads appears. If a
cable of less than 10 leads is connected, under the name of the lead that does not exist the
symbol "-" appears. If the lead is not connected under the indication appears the symbol "X" and
if the lead is connected the symbol "O" appears.
In the RL lead the symbol "?" always appears, since this is the one that is taken as reference. If
this lead is not connected, in all the remaining leads the symbol "x" appears, since the
connections cannot be checked.
NOTE: In case of working with 3 lead patient cable, only the cable type will be indicated, but it
will not be possible to check the connection of the different leads, since with this type of cable
indication of loose lead is not given.