5
Control by remote
Remove the foil from the battery compartment of the remote
control, and the remote control will be ready for use.
Use the same buttons you found on the fireplace control. The
remote control is using infrared technology, so point the remote
control the fireplace you want to control. The infrared signal
works from a maximum distance of 4-5 meters, make sure that
no objects or people get between you and the fireplace during
the control.
RELEASE
PULL
OPEN
PUSH
CR2025
RELEASE
CR2025
WEEK/TIME
SET UP
MIN
DAY
HOUR
Timer set up ont he remote:
After pressing the
button,
press the
button to chose ON/OFF. This allows you to
change the timing of switching on or off at a given time. Please
do not set the timer for a period when you cannot monitor its
operation! After commissioning, check that all timers are off.
Temperature adjustment:
You can also set the temperature
on the remote. Press the
heating button (once or
twice depending on the desired power level), then adjust the
temperature in the range of 15 to 30 degrees Celsius using the
“+” and “-” buttons.
Overheating protection
If the device overheats for some reason, it will turn off automatically.
Remove any objects that have caused overheating. To safely restart
the fireplace, turn off the power for 15 minutes. Once the appliance
has cooled down, it will switch on again.
Cleaning
Always switch off, unplug and let the appliance cool down before
cleaning. Use a dry cloth or vacuum cleaner to remove dust. The
housing should only be wiped with a slightly damp cloth, making
sure that no moisture enters the device! Do not use chemicals or
alcohol during cleaning!
Storing
Store in a cool, dry place. Do not throw away the product box.
You can use it to store the device when not in use. Caution Only
put the appliance back in its box if it has cooled down properly.
MALFUNCTIONS
Reason
Solution
Does not work / fan
does not rotate.
Check the safety shutdown mode.
(The unit has overheated or shut
down for some reason.
The following icon is
displayed on the device
stopped:
The device is working properly.
It’s been sensed that the air in the
room had cooled by 5-10 degrees.
For economical use, make sure that
one of the doors and windows is not
open.
The flame effect does
not work.
Check the LEDs, restart the device
Remote control does
not work.
Check the polarity of the battery and
whether it needs to be replaced.
It may be too far from the fireplace
or some landmark may be in the
way of the signal.
Proper disposal of the appliance (Electrical
appliance)
(It is valid in the European Union and in all other European states
that participate in selective collection) According to Directive
2012/19 / EU, electrical waste and appliances must not be
disposed of with household waste. Old appliances should be
placed at a collection area to maximize the recycling of raw
materials, thus reducing their impact on human health and the
environment. The crossed-out wheeled bin symbol is attached
to all products it requires to be collected separately. Consumers
should contact their local authorities for more information.
