4
installation, make sure that the wall section has the correct load
capacity and can provide the power supply for the device in the
given location. When attaching to drywall, use a special drywall
dowel, not the one included in the package! When fixing to a
wooden surface, it is not necessary to pre-drill the holes and use
dowels for the screws!
1. Using a spirit level and pencil, draw a horizontal line to the wall
at the desired height.
2. Mark the location of the screws on the horizontal line, on which
you will mount the device. The measured distance between the
screws is: 26.7 cm.
26.7 cm
3. Drill the holes for the fireplace.
4. Insert the supplied dowels into the holes until they are aligned
with the plane of the wall.
5. Screw the screws into the dowels so that you can just hook the
screw head into the fixing lugs of the fireplace.
6. Place the fireplace on the screws and make sure it fits snugly
and accurately.
7. Before connecting to the mains, make sure that the main
switch is off.
How to use the device
There are two ways to control the fireplace:
1. Using the buttons on the fireplace
2. Accessory with remote control
Control by the fireplace panel
When controlling the fireplace, please note that it takes a few
seconds for the control unit to receive the given instruction and
process it.
Turn on fireplace:
By pressing
the button, the fireplace
switches on and the heating starts automatically. You can set
the functions you need. Pressing the button again turns off the
fireplace.
Set the exact time:
You can set the real time by pressing
the button. Day (Sunday, Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday), hours and minutes.
Brightness setting:
By pressing
the button. By pressing
the + button, the fireplace is brighter and has more brightness.
You can reduce the brightness by 4 levels by pressing the - button.
Setting the heat output:
Press the
button once to select
the low heating level. Press twice in succession to set the high
temperature. If you press the button again, the fireplace heating
will stop and the fan will start 10 seconds after the heating is
stopped. Temperature control is possible on the remote control.
