Beurer GL50
29
2
After displaying the average value for 90 days “after meals”
• the average for the last 7 days of values labelled as “general”
• the symbol,
• the unit of measurement for blood glucose values and
• “
“
are shown on the display.
Press “+” repeatedly to display the average blood glucose value from the last 14, 30 and
90 days for values labelled as “general” .
3
You can cancel the process at any time. To do so, press the On/Off button or wait until the
device switches itself off automatically after 2 minutes.
6.4 Evaluating measured values on a PC
The GL50 monitor features an integrated plug-in USB stick. GlucoMemory blood glucose evaluation
software is installed on the USB stick (for position of the USB connection, see page 10). The GL50
is compatible with Diabass and SiDiary.
GlucoMemory blood glucose evaluation software is pre-installed on the monitor’s USB stick. You do
not need to install the software locally on a PC. This software enables you to evaluate your saved
measured values, add insulin doses with manual entries and print or export your results as a PDF or
CSV file. The software helps you and your GP to better monitor your blood glucose level.
For more information, please read the software manual for the GlucoMemory software, including
all the necessary information and a detailed description of how to use the software (in English and
German language).
Note
• An effective evaluation is only possible if you have set the date and time correctly (see “Setting the
date and time” on page 14).
• Measurements cannot be taken while the USB stick is connected to a PC.
• The measurements remain saved on the blood glucose monitor when the USB stick is removed from
the PC.
• It is not possible to save software entries on the USB stick. Values are read-only.
