Maintenance
Manual No. 101300
Maintenance
5-7
March 16, 2015
Operating Instructions and Parts List for the Whizard Quantum
®
Trimmer
DISASSEMBLY OF HANDPIECE (CONTINUED)
Remove the Bearing from the Frame
•
The bearing is pulled out from the front of
the tool.
•
Use a screwdriver to reach into the bearing
and catch the bearing grease groove.
•
While pulling upward, try to rotate the
bearing back and forth. Since the bearing is
not a press-fit, this will work in most cases.
The handpiece is now completely disassembled.
NOTE:
The cover retaining screws do not normally need removed. If they do need removal, turn
the screw while pulling down to engage the thread in the frame.
NOTICE
If the bearing will not come out, it may be necessary to run a tap into the
bearing and pull on the tap. If this is done, then the bearing must be replaced
due to damage.
A bearing removal tool is available. Order part number 184983.
COMPANY
CONFIDENTIAL
