background image

56

E87026-00 Oct11E

1001 Brown Avenue  •  Toledo, Ohio  43607-0127 

Customer Service: 888-GO-BETCO  •  Fax: 800-445-5056  •  Technical Service: 877-856-5954  •  www.betco.com

10 year coverage

Subject to the conditions stated below, 
Betco warrants parts and labor on 
rotationally molded polyethylene tanks/
housings and injection molded vacuum 
head assemblies to be free from defects 
in materials and workmanship for 
a period of ten years to the original 
purchaser.

3 Year Coverage

Subject to the conditions stated below, 
Betco warrants parts and labor on all 
other Betco components to be free from 
defects in materials and workmanship 
for a period of three years to the origi-
nal purchaser.

1 Year Coverage

Subject to the conditions stated below, 
Betco offers a limited warranty on parts 
and labor on the following equipment:  
parts and accessories to be free from 
defects in materials and workmanship 
for a period of one year to the original 
purchaser.

•  HF14 Upright Vacuum: #E88820-00 

•  Bac Pac Lite Vacuum: #85903-00

• FiberPRO

®

 Floor Dryer: #85507-00 

•  WORKMAN™ Series Vacuums: 

#85024-00, #85025-00, #83012-00, 
#85027-00 

•  CV100T Vacuum: #85023-00

•  All Tools and Accessories

•  All Battery Chargers

•  All Batteries are pro-rated for 1 year

Allowable Travel Time Warranty Reimbursement:

Eligible equipment: All battery and propane powered equipment products.  Warranty period: 90 days from date of sale to the 
original purchaser. A maximum 60 mile round trip at 44 cents per mile will be allowed for warranty consideration.

Propane Machine Warranty:

Honda engines are warranted by Honda for a period of 2 years against manufacturer defects. Kawasaki engines are warranted 
by Kawasaki for a period of 2 years against manufacturer defects. All other components (except wear items)*  are warranted 
by Betco for a period of 3 years.

*Wear Items exempt from Warranty consideration include but may not be limited to: power cords, transport wheels, 
vacuum bags, belts, squeegee blades, pad drivers, clutch plates, handle grips, fi lters, screens, throttle cables, brushes 
and carbon brushes.

Subject to the conditions and exceptions stated in this warranty, Betco warrants the Betco products to be free from defects in 
material and workmanship, under normal use and service, for the periods listed under the warranty policy to the original pur-
chaser. At any time during the warranty period, Betco will furnish replacement parts for the Betco parts to the original purchas-
er. Such parts will be furnished and charged including transportation costs, to the original owner through any Betco authorized 
Service Distributor. If the original part is returned within the warranty policy period from date of delivery for inspection by 
Betco and is found to be defective the owner will be credited for the cost of replacement parts plus shipping and handling. 
Replacement parts that have become defective through wear or abuse are not included in this warranty.

This warranty does not apply to damage or defect caused by accident, misuse. Negligence, fi re, or to any Betco product which 
has been serviced or repaired by other than an authorized Betco Service Distributor or Betco factory personnel. This warranty 
is void if products are used for any purpose other than that which was intended. There are no other warranties expressed or 
implied. In no event shall Betco be liable for incidental or consequential damages or any damage to person or property. (Please 
note some states do not allow the exclusion or limitations for incidental and consequential damages)

BETCO US WARRANTY POLICY

Summary of Contents for Stealth ASD26BT

























































Reviews: