Beta RR 250 2T EUROPA 2019, Owner'S Manual

Page: 26 / 146

2
OPERA
TION
24
EN
3 GENERAL CHARACTERISTICS
3.1 DASHBOARD START-UP PROCESS
The dashboard do some start-up process when is turned ON. There are three differ-
ent wakes up events for starting the dashboard.
This start-up process consists in turning ON the telltales and the LCD backlight and
the LCD will show all the segments during 2 seconds.
After the start-up process, dashboard is kept ON during 30 seconds if there are no
events as pushbutton press, speed signal or engine ON.
3.1.1 WAKE UP EVENTS
3.1.1.1 Motorbike power supply is activated
When the power supply of dashboard is activated (e.g. when engine is turned on),
the dashboard does the normal start-up process and is kept ON while
3.1.1.2 Wheel revolution
If the motorbike generated a speed pulse, the dashboard will be turned ON doing
the normal start-up process. After the start-up process the dashboard will display the
normal mode, and will be ON during 30 seconds if no speed pulse is generated.
3.1.1.3 Button is pushed
If one or both buttons are pushed the dashboard will be turned ON doing the start-
up process.
After the start-up process the dashboard will display the normal mode, and will be
ON during 30 seconds if no pushbutton is pressed.
3.2 LCD DISPLAY
Dashboard is equipped with a LCD display for showing following information:
- Speed
- SoC vehicle battery
- Odometer (distance or ride time)
- Trip TOTAL-A-B (distance or ride time)
- Clock
Each information/data is refreshed independently at different rate, depending on
information type and variability of this information.