UG-TQ22-EN (V2.2-211226)
- 17 -
TQ-22
Mixer Reference
manua
2.1.7 Copy to
When you have carefully set an input channel, its parameters have met the requirements, and other
channels have basic or identical setting requirements with this channel. In this case, the parameter copy
function will be used to quickly complete the parameters of other channels settings.
01
In the navigation bar, click the index page or the
fader page button to switch to the page where the
channel is located. The small bright spot in the
figure is the gain position indication of the channel.
02
System setup button, click to enter the system
parameter control page. Same function as the
button
on the panel.
03
Scene button, click to enter scene control page, save
or load the scene parameters you need. It has the
same function as the
button on the panel.
04
Home button, click to return to the channel home
page.
06
Click to switch to the noise gate control page.
05
Click to switch to the PEQ control page.
08
Click to switch to the copy control page.
07
Click to switch to the compressor control page.
10
Click to switch to the channel setting page.
09
Click to switch to the parameter preset page.
12
The white area is the current channel and the
parameters are set. The blue area is the target
channel for which you want to copy parameters.
Click to select. Multiple choice. Gray is the
unselected channel.
11
Click to switch to the channel overview page.
13
Click this button to copy the parameters of the
current channel to the selected target channel.
14
When turned on, the channel level parameter is
ignored when the parameter is copied.
15
When turned on, the channel name parameter is
ignored when the parameter is copied.
16
Channel master control board with adjustable
gain and mute.
03
02
01
04
06
07
08
09
10
11
16
05
13
12
14
15
