UG-TQ22-EN (V2.2-211226)
- 9 -
TQ-22
Mixer Reference
manua
1.6. Monitor headphone
On the panel turn
，
the system will pop up the Solo setup
，
the user can setup specs, view
the headphone output level, also you can clear Solo which is clear all monitor.
1.7. Restrictions on USB interface power
This mixer has two USB ports and a USB light port (only 5V power supply), but no matter which
USB port, its power supply capacity is less than 500mA, it is strongly recommended:
1). Do not insert a high current USB device.
2). Do not insert the phone into the above socket for charging, the test has proved: when the
phone into the USB port charge, and the same time the phone as the input source for the
mixer, it will produce interference ! !
Use the phone comes with the charger from other places to take power, and the phone as the input
source of the mixer will not be a problem.
01
Rotate the headphone monitor knob on the panel to automatically pop up this monitor control interface. If there is
no operation, it will automatically retreat in 3 seconds.
02
Headphone monitoring can be accessed by clicking the button
【
Solo
】
on the screen or by clicking the button
on the panel. Multiple channels can be monitored simultaneously.
03
Headphone monitor output level meter.
04
Clear all related setup with headphone monitor.
05
Quit operation.
06
Volume adjustment.
07
For the input channels, the headphone monitor access point can be selected before the fader or after the fader. The
access points of the earphones of the output channels are all before the faders.
02
01
03
04
05
06
07
