-12-
UG-TQ22-EN (V2.2-211226)
TQ-22
Mixer Reference
manual
2.1.2 Overview of input channels
Click the channel label
or click the channel button
, the system
automatically enters the input channel overview page. On this page, you can view most of the
parameter settings of the current channel. The physical knobs and buttons on the machine panel
can be used for quick adjustment. Related parameters. There are 5 overview areas: [Config],
[PEQ], [Gate], [Comp], [Route Assignment], click the first 4 areas to enter the full screen mode
of the corresponding function.
01
In the navigation bar, click the index page or the
fader page button to switch to the page where the
channel is located. The small bright spot in the
figure is the gain position indication of the channel.
02
System setup button, click to enter the system
parameter control page. Same function as the
button
on the panel.
03
Scene button, click to enter scene control page, save
or load the scene parameters you need. It has the
same function as the
button on the panel.
04
Home button, click to return to the channel home
page.
06
Click to switch to the noise gate control page.
05
Click to switch to the PEQ control page.
08
Click to switch to the copy control page.
07
Click to switch to the compressor control page.
10
Click to switch to the channel setting page.
09
Click to switch to the parameter preset page.
12
Channel overview area. Display only, not screen
operation. Click to enter full screen mode.
11
Click to switch to the channel overview page.
14
Comp. overview area, only display. Click to
enter full screen mode.
13
Gate overview area, only display cannot be
operated on screen. Click to enter full screen mode.
16
Routing routing overview area. Display only
cannot be operated on the screen. The progress
bar indicates the amount of transmission, and red
indicates that the transmission is muted. The
green text indicates the bus corresponding to the
current send knob.
15
PEQ overview area, only display can not be
operated on screen. Click to enter full screen mode.
17
Current channel master control board, adjustable
gain and mute.
03
02
01
04
06
07
08
09
11
10
17
05
14
15
12
16
13
