Beta Motorcycles X Trainer 300 2T 2015, Workshop Manual, Page: 79 / 117

3
77
M
O
TO
R C
H
EC
k
S AN
d
ASS
EM
B
LY
3.9.3 PUMP UNIT ASSEMBLY
Grease the oil seal housing on the pump body
1 . Position the oil seal 2 so that the thicker edge
faces the outside of the pump body. Insert the
oil seal, having it enter the seat very slowly to
keep it from deteriorating. The oil seal edge
must be at the same quota of the pump body
(outer side).
3.9.4 ASSEMBLY OF
COMPLETE CLUTCH
COVER ANd PUMP UNIT
Apply a new gasket
1
placed between the right
crankcase half and the inner clutch cover using
the two reference pins 2 to keep it in place.
Couple the inner clutch cover to the right crank-
case half and rotate the centrifugal shaft until
the shaft meshes in the main gear.
2
1
Thicker edge
Application of the oil seal to pump body.
positioning of gasket and reference pins.
1
2