Beta Motorcycles X Trainer 300 2T 2015, Workshop Manual, Page: 58 / 117

3
56
M
O
TO
R C
H
EC
k
S AN
d
ASS
EM
B
LY
3.4.5 Assembly of gearbox
and inner control
Insert the entire primary 1 and secondary unit
2 into the respective seats on the left half-cas-
ing simultaneously. Remember to oil the gears
abundantly with gear oil and to grease the shafts
supporting them in the areas where they are
coupled with the bearing with graphitic grease.
Make sure that all the parts slide properly.
Insert the centre bearing 3 and the O-ring 4 on
the secondary unit.
Insertion of gearbox in left crankcase.
1
2
4
3
Detail of centre bearing 3 and O-ring 4 coupled to the
secondary shaft.
3
4