Beta Motorcycles X Trainer 300 2T 2015, Workshop Manual, Page: 35 / 117

2
33
ENGI
N
E d
IS
A
SSEM
BL
Y
Using the special primary tool A (code 026140010
000), disassemble the nut that tightens the
primary gear 6 onto the crankshaft.
NOTE: the clutch case must be in its seat to be
able to disassemble the main gear.
Attention!
The nut must be turned clockwise
Disassembly of the main gear nut.
Remove the washer 7 , the case 8 , the roller cage
9 and the centre bearing 10.
Safety rose-petal 4; nut 5; washer 6; case 7; roller cage 8; centre bearing 9.
Removal of main gear.
Extract the main gear 13 .
Remove the circlip 14 from the secondary change
shaft.
7
6
5
4
9
8
6
A
13
14