Beta Motorcycles X Trainer 300 2T 2015, Workshop Manual, Page: 69 / 117

3
67
M
O
TO
R C
H
EC
k
S AN
d
ASS
EM
B
LY
3.8.3 Check of clutch case,
roller bearing and
internal centre bearing
Before reassembling the clutch case, make sure
that the sides of the teeth A , dedicated to main
transmission and B , dedicated to meshing with
the kickstart idler gear and oil pumps, have no
superficial nicks or abnormal wear.
Also closely check that the teeth C , upon which
the driving discs engage, are not chipped or
deeply cut.
Check the external surface D does not show trac-
es of meshing or abnormal wear.
If any damage is found, have the piece replaced.
clUTcH cASE:
A. Teeth meshing with main gear;
B. Teeth meshing with kickstart idler gear;
c. Teeth meshing with driving discs;
D. External washer.
C
A
B
d