BestCode Next 8 Series, Technical Manual, Page: 72 / 305

BestCode Next Series 8 Technical Manual October 2022 Page 58 of 290
PE 2
Option Enable or disable use of the 2
nd
Photoeye
Off Signals sent to PE 2 have no action
Reverse
Trigger Signals sent to PE 2 are a print trigger, but the print direction is reversed. Used for traverse
printing where head moves in 2 directions.
Mirror
Direction When the PE 2 signal is held high, the print direction is mirrored. Used for traverse printing
where head moves in 2 directions.
Flip
Direction When the PE 2 signal is held high, the print direction is flipped. Used for traverse printing
where head moves in 2 directions.
Counter
Reset When the PE signal is received, the Counters enabled in the Counter Setup will be reset to the
defined start value.
PE2
Setup Select which counters will be reset when PE2 is triggered.
Print
Interupt When PE 2 signal is received the currently printing code is interupted
immediately.
Count
Trigger When PE 2 signal is received, the Counters enabled in the Counter Setup will increment.
Delay 2 Disabled Enabled
There is no delay value after a
print trigger provided on PE2 There is a delay value after a print trigger
provided on PE2