BestCode Next 8 Series, Technical Manual, Page: 65 / 305

BestCode Next Series 8 Technical Manual October 2022 Page 51 of 290
Dual Sensor Adjust Screen
Speed Print Speed Setting Fast, Faster, Fastest, UltraFast
Print Resolution The number of Printed rasters per 1
inch. 30-120 (typical)
Print Length Displays the length of the message
based on the provided Print
Resolution 0.1 – 320 inches
Sensor 1 to Sensor 2 Distance Distance between Print Trigger 1 and
Print Trigger 2. Must be a distance
longer than 1”.
0.05-50.00 inches
Product Delay Distance The distance from the product edge to
the beginning of the code. 0.05-50.00 inches
Sensor 1 to Print Slot Distance Distance between the Print Detect
location and the Slot where drops exit
the printhead. 0.05-50.00 inches
Must be a distance longer than the
Product length and the Product delay
combined.
Max Print Speed The maximum print speed capacity for
the selected
“Speed” setting (Fast,
Faster, Fastest, UltraFast)
Varies by Template
Actual Print Speed The necessary Raster /s Print speed to
meet the Print Resolution requested. If this value is Greater than the Max
Print Speed, the Speed Setting must
be increased (Fast => Faster, etc)
Line Speed Displays the calculated converyor line
speed 0.000 – 9999.999 in/s
Sensor Time The amount of time for the product to
pass the Print Sensor. -
Print Time The duration of the time while the
printer was applying the code. -
Delay Time The amount of delay time in
milliseconds to achieve the desired
print location -
Drop Production Total number of drops used to
generate the printing message
-
Print Rasters
Used for internal calculations