background image

- 12 -

Limited Warranty
Warranty Period and Exclusions: Broan-NuTone, LLC(the “Company”) warrants to the consumer purchaser of its product (“you”) that 
the product (the “Product”) will be free from material defects in the materials or its workmanship for a period of 

fi

 ve (5) years from the 

date of original purchase (or such longer period as may be required by applicable law) or a period of two (2) years from the date of 
service for any labor provided on the Product.

The limited warranty period for any replacement parts provided by the Company and for any Products repaired or replaced under this 
limited warranty shall be the remainder of the original warranty period (or such longer period as may be required by applicable law).

THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES AND BULBS, FUSES, FILTERS, DUCTS, 
ROOF CAPS, WALL CAPS AND OTHER ACCESSORIES FOR DUCTING.  This warranty does not cover (a) normal maintenance and 
service, (b) normal wear and tear, (c) any Products or parts which have been subject to misuse, abuse, abnormal usage, negligence, 
accident, improper or insu

  cient maintenance, storage or repair (other than repair by the Company), (d) damage caused by faulty 

installation, or installation or use contrary to recommendations or instructions, (f) damage caused by exposure to salt air, (g) damage in 
transit, (h) natural wear of 

fi

 nish, (i) Products in commercial or nonresidential use, (j) damage caused by 

fi

 re, 

fl

 ood or other act of God, or 

(k) Products with altered, defaced or removed serial numbers. This warranty covers only Products sold to consumers in North America.

This warranty supersedes all prior warranties and, subject to applicable law, is not transferable from the original consumer purchaser.

No Other Warranties: This Limited Warranty contains the Company’s sole obligation and your sole remedy for defective Products. The 
foregoing warranties are exclusive and in lieu of any other warranties and conditions, express or implied.  TO THE MAXIMUM EXTENT 
PERMITTED BY APPLICABLE LAW, THE COMPANY DISCLAIMS AND EXCLUDES ALL OTHER EXPRESS WARRANTIES AND 
CONDITIONS, AND DISCLAIMS AND EXCLUDES ALL WARRANTIES AND CONDITIONS IMPLIED BY LAW, INCLUDING WITHOUT 
LIMITATION THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. To the extent that applicable law prohibits 
the exclusion of implied warranties or conditions, the duration of any applicable implied warranty or condition is limited to the period 
speci

fi

 ed for the express warranty above. Some jurisdictions (which may include the Province of Quebec or speci

fi

 c US states) do not 

allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Any oral or written description of 
the Product is for the sole purpose of identifying it and shall not be construed as an express warranty.

Whenever possible, each provision of this Limited Warranty shall be interpreted in such manner as to be e

 ective and valid under 

applicable law, but if any provision is held to be prohibited or invalid, such provision shall be ine

 ective only to the extent of such 

prohibition or invalidity, without invalidating the remainder of such provision or the other remaining provisions of the Limited Warranty.

Remedy: During the applicable limited warranty period, the Company will, at its option, provide replacement parts for, or repair or replace, 
without charge, any Product or part thereof, to the extent the Company 

fi

 nds it to be covered by and in breach of this limited warranty 

under normal use and service. The Company will ship the repaired or replaced Product or replacement parts to you at no charge. You 
are responsible for all costs for removal, reinstallation and shipping, insurance or other freight charges incurred in the shipment of the 
Product or part to the Company. If you must send the Product or part to the Company, as instructed by the Company, you must properly 
pack the Product or part—the Company is not responsible for damage in transit. The Company reserves the right to utilize reconditioned, 
refurbished, repaired or remanufactured Products or parts in the warranty repair or replacement process. Such Products and parts 
will be comparable in function and performance to an original Product or part and warranted for the remainder of the original warranty 
period (or such longer period as may be required by applicable law).

Company reserves the right, in its sole discretion, to refund the money actually paid by you for the Product.    If the Product or component 
is no longer available, replacement may be made with a similar product of equal or greater value, at Company’s sole discretion.  This 
is your sole and exclusive remedy for breach of this limited warranty.
Exclusion of Damages: THE COMPANY’S OBLIGATION TO PROVIDE REPLACEMENT PARTS, OR REPAIR OR REPLACE, AT THE 
COMPANY’S OPTION, SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY AND THE COMPANY’S 
SOLE AND EXCLUSIVE OBLIGATION. THE COMPANY SHALL NOT BE LIABLE FOR INCIDENTAL, INDIRECT, CONSEQUENTIAL 
OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE PRODUCT, ITS USE OR PERFORMANCE.

Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may 
not apply to you. This warranty gives you speci

fi

 c legal rights, and you may also have other rights, which vary from jurisdiction to jurisdic-

tion.  The disclaimers, exclusions, and limitations of liability under this warranty will not apply to the extent prohibited by applicable law.

This warranty covers only replacement or repair of defective Products or parts thereof at the Company’s main facility and does not 
include the cost of 

fi

 eld service travel and living expenses.

Any assistance the Company provides to or procures for you outside the terms, limitations or exclusions of this limited warranty will not 
constitute a waiver of such terms, limitations or exclusions, nor will such assistance extend or revive the warranty.

The Company will not reimburse you for any expenses incurred by you in repairing or replacing any defective Product, except for those 
incurred with the Company’s prior written permission.

How to Obtain Warranty Service: To qualify for warranty service, you must (a) notify the Company at the address or telephone number 
stated below within seven (7) days of discovering the covered defect, (b) give the model number and part identi

fi

 cation and (c) describe 

the nature of any defect in the Product or part. At the time of requesting warranty service, you must present evidence of the original 
purchase date. If you cannot provide a copy of the original written limited warranty, then the terms of the Company’s most current written 
limited warranty for your particular product will control. 

PRODUCT SPECIFICATIONS
All illustrations and speci

fi

 cations in this catalog are based on the latest product information available at time of production.  Broan-NuTone, 

LLC and BEST® reserves the right to make changes at any time, without notice, in prices, colors, materials, equipment, speci

fi

 cations 

and models, place of manufacture and to discontinue models or equipment.

Best
Broan-NuTone, LLC- 926 W. State Street, Hartford, WI 53207
1-800-637-1453
Best®, 550 Lemire Blvd., Drummondville, QC, Canada (1-866-737-7770) www.bestrangehoods.com

Summary of Contents for U102I













































Reviews: