1.
Install a 20" x 15" plywood decorative board at the top of the
front gable, flush with the top of the roof sheathing. Use 8d galv.
nails.
2.
Install 1x6 trim boards over the 2x4's flush with the top of the
roof sheathing. Use 8d galv. nails for all trim boards.
3.
Install a 52" long x 2-1/2" wide board with
the angle end at the peak of the roof.
4.
Install a 45" long x 2-1/2" wide board.
5.
Repeat steps 1-4 for opposite side.
1x6 Trim Board
Step 18 Install Gable Trim
6.
Install a 52" long x 3-1/2" wide
board with the angle end at the
peak of the roof on rear gable.
7.
Install a 45" long x 3-1/2" wide
board.
8.
Install a 59-1/8"" long 1x4 trim
boards on side wall flush with
back wall trim.
9.
Repeat steps 6-8 for opposite
side
