1.
Install a 46-1/2" long 2x6 on the sidewall. Butt up to
previously installed 72" tie plate on side wall. The 2x6
will protrude through the front wall panel. Use 10d sinkers.
2.
Install 26-1/2" long filler board flush along angled side
of front wall. The filler will be 3/4" below top of the wall
frame. Use 10d sinkers.
3.
Install a 52-1/4" long 1x4 trim board with angled end flush with the top wall plate. Use
a 3/8" siding shim, packed with the hardware, to space the trim board away from the
filler installed above. This gap will receive soffit panels later. Install with 8d galv. nails.
Siding Shim
4.
Install a 46-1/2" long 2x6 on the right
sidewall.
5.
Install 2nd 26-1/2" filler flush with the
angle part of the front wall. The filler
will be 3/4" below top of the wall
frame.
6.
Cut to fit a 62" long 1x4 trim board
flush along top of wall frame. Before
cutting measure the distance to account
for the thickness of the 3/8" siding
shim.
Locate (2) two 3-1/2" wide x 26-1/2" long 3/4" white pine boards that have a 3/8" thick
siding board attached. When the fillers are installed the white pine board may be facing
out or facing the siding. It doesn't matter, these fillers will be cover over with trim.
3/4" Space
3/4" Space
62" Long 1x4 Cut to Fit
Siding Shim
Step 12 Install Upper Front Wall Trim
2x6 Top Plate
1x4 Trim
3-1/2" Wide Filler Board
2x6 Top Plate
