SR510000
- Sensors
Programming manual
www.besknx.com
6
Name
Object 1: Channel 1 - Detection event: Byte
Function
1-byte communication object for motion detection in channel 1
Description
When a motion is detected, the sensor is triggered and it sends the correspondent parameter On. When
the countdown finishes (switch-off delay) it sends the correspondent parameter Off.
Name
Object 2: Channel 1 - Detection event: 2 Bytes
Function
2-bytes communication object for motion detection in channel 1
Description
When a motion is detected, the sensor is triggered and it sends the correspondent parameter On. When
the countdown finishes (switch-off delay) it sends the correspondent parameter Off.
Name
Object 3: Channel 1 - Enable / disable channel
Function
1-bit communication object for enabling/disabling a channel
Description
1 = Motion detection enabled.
0 = Motion detection disabled (stand-by mode).
Name
Object 4: Channel 1 – Master trigger
Function
1-bit communication object for remote trigger of the sensor
Description
1 = Forces a remote detection.
0 = Forces a remote end of detection.
Used for Master-Slave mode. It allows to emulate a detection without any motion. By sending 1, the
detector is activated remotely performing the start detection event. Slave sensors emulate Master
detections: link bit detection event of the slave with this object of the master.
Name
Object 5: Channel 1 - Remaining time (seconds)
Function
2-bytes communication object for motion reading the remaining time
Description
The remaining time of the countdown after motion detection can be read by this communication object.
0 – 65535 = Remaining time in seconds for end of detection event.
Name
Object 6: Channel 2 - Detection event: Bit
Function
1-bit communication object for motion detection in channel 2
Description
When a motion is detected, the sensor is triggered and it sends the correspondent parameter On. When
the countdown finishes (switch-off delay) it sends the correspondent parameter Off.
Name
Object 7: Channel 2 - Detection event: Byte
Function
1-byte communication object for motion detection in channel 2
Description
When a motion is detected, the sensor is triggered and it sends the correspondent parameter On. When
the countdown finishes (switch-off delay) it sends the correspondent parameter Off.