SR510000
- Sensors
Programming manual
www.besknx.com
19
4.3.4
Parameter settings
The following parameter setting is generally recommended for this example. The ideal parameters may
change depending on the application or installation.
Parameter name
Recommended setting
General parameters
Smoothing
2
Sampling time
16
Ch1 Event values
Bit event off
0
Detection event notification
No
End of detection event notification
yes
Ch1 Delays
Channel enable delay
0
Channel disable delay
0
Switch-off delay
30
A Smoothing = 2 and Sampling time = 16 are generally recommended for normal lightning control by motion detection.
The detection event notification should be disabled because we do not want the sensor to do anything when motion is
detected; we only want to switch of the light after 30 seconds without any movement in the room
