Berthold Duo Xpert LB 478 MPLM, Operating Manual

Page: 61 / 136

LB 478 MPLM 7 Main Menu Device Setup
56925-8BA2 Rev.00, 07/2019
61
Detector configuration
Device Setup | Setup | Sensors | Detector configuration
In the window “Detector configuration” the detectors for the measuring system
are added and configured. By clicking the button
<Edit> (Fig. 40, item 2) the device
ID, the position and description can be changed.
1
2
3
4
5 Button < + > to add Detector
Button < Edit >
Button < - > to remove Detector
Type of selected detector
List of the Detectors
6
7
8 Input field “Description”
Input field “Position”
Input field “Device ID of the detector”
Fig. 40 Detector configuration (only Master EVU)
1. Click on < + > to add a new detector.
2. Enter the Detector Device ID (Fig. 40, item 8), located at the socket of the de-
tector (Fig. 41, item 2).
3. Enter the position of the detector (Fig. 40, item 7), depending on measure-
ment arrangement (Fig. 41, item 3). This values must be agreed with an
authorised person.
4. Enter a Description (Fig. 40, item 6) and click < OK > .
u
The detector was added successfully.
1
2
3 Vessel
Detector Device ID
Position (depending on measurement arrangement)
Fig. 41 Detector position / Device ID