Berthold castxpert LB 452, Operating Manual

Page: 51 / 156

c
6 The System Menu
b
Rev. 04, 03/2015
51
6.2.3 Display
1 Cursor visible "inactive"
2 Button for adoption of settings
3 Button for touch display calibration menu
4 Display of the start screen after X s
5 Switching off of the display after X s
6 Display submenu button
Fig. 29 System Menu. Settings - Display
In the System menu | Settings click on <Display> (Fig. 27, Pos. 4), to make changes
to the display or to calibrate the touch display.
In the <Display> submenu, you can make the following settings:
Display Off Here, the turn-off time of the display can be entered.
For a value of 0 s the display is always active.
Menu Timeout Here, it is possible to enter the time after which the
menu should be left if the user has not made an entry.
Cursor Enabled If the EVU is to be operated with a mouse, a tick must
be put in the "Cursor visible" check box (Fig. 29, Pos. 1).
The cursor is visible even if there is no mouse connected
and the EVU is operated via the touch display.
Calibrate Touch When the <Calibrate Touch> button is clicked, a menu
for touch display calibration is opened.