Berthold castxpert LB 452, Operating Manual

Page: 142 / 156

c
11 Technical Information
142
Rev. 04, 03/2015
b
Extension-
Module
(Option) 4-20 mA current output with option of activating current output signal
monitoring:
potential-free
4XJUDIBCMFTPVSDF NBY*NQFEBODFûPSTJOL NBY%$7
ûNJO%$7ûNPEF
Adjustable fault current in the event of an error: 2 mA, 22 mA or
freezing of last value
Can be configured for:
Fill level (additional time constant, freely adjustable)
Detector temperature
Detector count
2 digital inputs:
potential-free, for ext. Choice of up to 4 calibration curves
2 relay outputs for alarm signalling:
Alarm relay 1: Single pole double throw (SPDT)
Alarm relay 2: Single pole single throw, normally open (SPST NO)
Max. of 33 VAC, 46 VDC, 5 A for each, non-inductive
Can be configured for alarm signals:
Max. level
Min. level
Detector temperature
Digital input confirmation
Pulse output:
Detector pulses looped, max. 12 V amplitude
Fuses:
2 x (Si3 and Si4) 5A/T/250 V according to IEC60127-3
1 x (Si5) 50 mA/T/250V according to IEC60127-3
Bus Module
(Option) GSD file is provided. Transmission of the following data:
Cyclic output data: Fill level, detector value (CPS),
Detector temperature, currently selected calibration curve,
system status (RUN/ERROR/WARNING/STOP)
Cyclic input data: Error
confirmation, calibration curve, full and empty adjustment
Profibus DP:
Complete Profibus DPV1 Slave according to IEC 61158
Automatic Profibus baud rate recognition (9,600 bit/s - 12 Mbit/s)
Standardised Profibus RS-485 port
Integrated isolation with DC/DC converter and opto-coupler
Profibus connection via 9-pole D-Sub socket
Profinet IO (planning stage):
Complete Profinet IO device implementation (Slave) with RT
classification
Fast Ethernet transfer 100 MBit/s in full duplex operation
Integrated isolation
Profinet IO connection via RJ45 standard socket