
Be42 OEM's Manual V5.0.XX - December - 2010 page 1
1
Be42
OEM’s Manual V5.0.XX
(Consult Section 15.0 for software upgrades & revisions)
The information in this document may be subject to change without prior notice.
No part of this document may be copied or reproduced in any form or any means without the prior written
consent of Bernini Design company. Bernini Design assumes no responsibility for any errors that may appear in
this instruction manual or in the wiring diagrams.
Although Bernini Design has taken all possible steps to ensure that the User Manual is complete, bug free and
up-to-date, we accept that errors may occur. If you encounter problems with this instruction manual, please
contact us.
Customer Support BERNINI DESIGN SRL Italy
e-mail:
mobile #1: +39 335 70 77 148 mobile #2: 0040 721 241 361
Warranty
Bernini Design SRL (hereinafter "BD") warrants that Be42 shall be free from defect in material or workmanship
for a period of 3 years from the BD delivery date. BD shall, at its discretion, repair or replace the product without
charge. BD shall return the Be42 to the buyer with the Default parameters at no extra charge. The buyer shall
provide sufficient information on any alleged defects in the product, so as to enable BD to determine their cause
and existence. If the Be42 is not defective, or the product is defective for reasons other than covered by this
warranty, the buyer will be charged accordingly. This warranty shall not apply if the Be42 has not been used in
accordance with the User Manual and other operating instruction, particularly if any defects are caused by
misuse, improper repair attempts, negligence in use or handling.
This purchase is non-refundable.
This equipment complies with EMC protection requirements
WARNING!! High voltage is present inside the Be42. To avoid electric-shock hazard, operating
personnel must not remove the protective cover. Do not disconnect the Earth connection. The Be42 can
start the engine at anytime. Do not work on equipment, which is controlled by the Be42. When servicing
the engine, disconnect the battery and battery charger. We recommend that warning signs be placed on
equipment indicating the above.
!! W A R N I N G !! Relays and solenoids connected to the Be42 must be suppressed
using flywheel diodes or suppression devices as indicated in section 18.0. In case the
VDC supply can deliver spikes over 40 Vdc we recommend to place a 1 A (fast blow) in
series to the terminal #24.