Bernina 820 Owner'S Manual Download Page 51

Page: 51 / 148

Balance

Balance Description

The sewing computer is tested and optimally set before it leaves the factory. Different

fabrics, threads, stabilizers and interfacings can affect programmed stitches so that they

are not sewn out properly.

These effects can be corrected with the electronic Balance so that the stitch formation

can be adjusted where necessary to suit the fabric.

practical and Decorative Stitches

►

in the left portion of the screen the stitch is displayed in

its original form (as programmed)

►

in the right portion of the screen the alterations made

are directly visible

►

the corrections can be made while sewing (with opened

screen)

corrections

►

the stitch sewn on the fabric (e.g. the Honeycomb stitch)

opens up and it does not look correct:

‣

turn the stitch length knob until the stitch in the right

portion of the screen is identical with the stitch on the

fabric

032298.53.04_1204_B820_EN

Summary of Contents for 820





















































































































































Search results

Summary of Contents for 820

Reviews:

Related manuals for 820

Brands by name

Popular brands

Bernina 820, Owner'S Manual

Search results

Summary of Contents for 820

Reviews:

Related manuals for 820

Brands by name

Popular brands