Bernina 820 Owner'S Manual Download Page 18

Page: 18 / 148

preparation

threading the upper thread

automatic threading

►

place thread spool on the rear or center spool pin

►

thread the corresponding guide on the telescopic rod,

hold with both hands and guide into the threading

opening of the sewing computer, taking it up to the

thread guide in the needle clamp

and

and pull from

back to front over the thread cutter

►

touch the automatic threader button, a message and an

animation appear

►

during threading the Start/Stop Button is illuminated red

►

if the thread has not been threaded correctly, an error

message appears

►

close the message with and start again

►

if the thread has been threaded correctly the Start/Stop

Button is illuminated green

manual threading

►

follow the two first steps as described above

►

touch «Manual threading» icon on screen

►

press «Automatic threading» button, then thread the

needle by hand

►

when using unruly threads, slip the net over

the upper thread spool

►

large net for large spools, small net for

small spools

►

this prevents the upper thread from slipping

and gives an even thread feed

►

place the thread(s) under the presser foot

and to the back before starting to sew

Do not start the threaded sewing computer

if there is no fabric on the stitch plate.

the sewing computer must be switched

on for threading.

032298.53.04_1204_B820_EN

Summary of Contents for 820





















































































































































Search results

Summary of Contents for 820

Reviews:

Related manuals for 820

Brands by name

Popular brands

Bernina 820, Owner'S Manual

Search results

Summary of Contents for 820

Reviews:

Related manuals for 820

Brands by name

Popular brands