Bernina 820 Owner'S Manual Download Page 24

Page: 24 / 148

Due to the width of the stitch plate hole the outer feed-dog

rows are relatively far apart.

When sewing corners the fabric does not feed well, since

only a part of the fabric is on the feed-dog.

Correct this by placing one or more plates close to the

edge of the fabric.

Sewing corners

Sewing with the Height compensation tool

The feed-dog works accurately if the presser foot is level.

If the presser foot is at an angle when sewing over a thick

seam, the feed-dog cannot grip. The fabric may jam.

To level the presser foot as required, place one, two or

three height-compensating plates behind the needle under

the presser foot.

To level the front of the foot, place one or more plates

under the right of the presser foot close to the needle.

Sew until the presser foot has passed the thick area and

remove the plates.

preparation

032298.53.04_1204_B820_EN

Summary of Contents for 820





















































































































































Search results

Summary of Contents for 820

Reviews:

Related manuals for 820

Brands by name

Popular brands

Bernina 820, Owner'S Manual

Search results

Summary of Contents for 820

Reviews:

Related manuals for 820

Brands by name

Popular brands