8
Switching the Controller's Operation Modes
The BEC PM1 controller has two distinctive operation modes:
Irr mode
- this is the default operation mode of the controller which
is used for Irrigation, Time Intervals Pressure Management and On/
off applications.
Pr mode
- this mode is used for the Pressure Management according
to Flow-rate application only.
Switching between these two operation modes is done by
simultaneously pressing the
and
keyboard buttons.
For example:
Changing from “Irr” to “Pr” mode:
Press the
and
buttons simultaneously for 5 second, the
system displays the mode name and starts switching to the Pr
mode. Continue pressing the buttons for additional 3 seconds until
the software version appears on screen (in a form of a number)
then release the buttons. The controller is now on its “Pr” mode.
Please note
that changing the controller’s mode requires about 10
seconds of continuous buttons pressing time in total.
Changing from “Pr” to “Irr” mode:
Keep pressing the
and
buttons for another 3 second,
the system displays the new mode name and switches back to
the Irr mode.
Important!
Before operation the controller for the first time
make sure that it is set to the correct operation mode for your
specific application.
