16
Battery Level
SentryHound-Pro contains an internal, sealed lead acid 12V battery. This battery takes 3-4 hours to charge fully
and can operate the unit without any AC power for over 24 hours. Battery power can be checked at any time by
pressing the BATTERY button. The LED clusters on the sensor pole will display (for 3 seconds) the remaining
battery power in 25% increments. When the lowest cluster is only lit, the battery has about 25% capacity left
and when all 4 LED clusters are lit, the battery is 100% charged.
25% Charge
50% Charge
75% Charge
100% Charge
