10
Mode 3: Wall‐mounted unidirectional
In this mode, one SentryHound-Pro unit is typically mounted to a wall
near a doorway or down a narrow hallway using the optional wall
mounting kit. Single pole detection range typically falls between 18 and
32 inches so be sure that foot traffic is not too far away from the sensors
in the pole. Also be sure that there are no ferrous sources that could be
moving on the other side of the wall.
In this configuration, the base of the unit must be removed in order to
allow mounting to the included wall bracket. Be sure the unit is mounted
on solid wall as low as possible toward the floor, otherwise contraband
could be slip by the sensors undetected. Once the units are powered on,
even small amounts of ferrous material passing anywhere in between the units, from ground level up to 75
inches above the ground, will trigger an alert. Poles will only trigger while someone is moving between them
meaning security staff can move freely around the portal without triggering any alert.
This configuration requires the unit to face away from the wall it is mounted to in order to see the LED alerts
and have access to the controls. Press the POWER button and wait a few seconds for the ALERT button to
blink.
WALL-MOUNTED UNIDIRECTIONAL
