UM - CODE N4 N5 N6 N10 - REV 0.3
2.2. Guarantee and maker’s responsibility
The guarantee of a good function and a complete conformity of the machines, that are to be used accordingly, depends on the correct application of the
instructions contained in this manual.
The maker declines all direct and indirect resposibility deriving from:
- Not following the instructions in the manual;
- Using the machine by personnel who has not read or well understood the contents of the present manual;
- Using the machine so that it does not conform to specific regulations in force in the country of installation;
- Unauthorized changes and/or repairs to the machine;
- The use of accessories and spare parts that are not original;
- Outstanding events.
If the machine is sold or given away, this automatically means that the maker is no longer responsible for the machine in question except for anything regarding the
EEC directive 98/37 (responsibility for any construction faults of the product).
2.3. The user’s obligations
The user must scrupulously observe the instructions in this manual for the maker’s guarantee to be valid and particularly:
- Always respect the limits of the machine;
- Always carry out a constant and diligent maintenance;
- Make sure the persons using the machine are qualified and able.
2.4. Marking — Plates
The following plates are installed on the machine:
- Maker’s identification plate, machine plate, technical data plate and EC marking; placed on the base, left- hand side.
8
