25
MAINTENANCE
* Please refer to parts breakdown section in subframe manual for parts identification
.
TROUBLESHOOTING
HOW TO KNOW
POINTS TO CHECK
Poor connections.
Recheck wiring with the owner's manual.
HI/LOW voltage tester does not work.
Connect it on battery posts (+ and -) of a functional battery.
If there is no light, the tester is damaged.
The control switch inoperative.
Test
both
connectors
with
HI/LOW
voltage
tester.
If light comes ON in both positions (IN & OUT), the switch is
operative.
Relay is damaged
When it is working, there is a "CLICK" sound when the control switch
is activated. Check connections with HI / LOW voltage tester.
Winch is damaged
The ultimate test is to connect the winch directly to the battery and
reverse the wires to test both directions. If the winch doesn't work, it is
damaged.
The limit switch is damaged.
When the limit switch is pushed or stuck inside, the winch can't raise
the accessory, only lower it. If not replace it.
The breaker is damaged.
Check the voltage on both terminals on the breaker with the HI / LOW
voltage tester. If not replace.
Summary of Contents for Northeast 700576
Page 28: ...26 PARTS BREAKDOWN CHUTE...
Page 30: ...28 PARTS BREAKDOWN SNOWBLOWER...
Page 34: ...32 PARTS BREAKDOWN NORTHEAST DRIVE MECHANISM...
Page 36: ...34 PARTS BREAKDOWN SUBFRAME...
