14
IMPORTANT:
Adjust the height of the three supports
(items 1, 2 and 3) to make sure the drive mechanism
pulley (item 4) is aligned with the engine pulley (item
5) more or less 1/8’’.
If applicable, you can remove or add a flat washer on
the tension pulley (item 6) for a better adjustment.
Engage and disengage the clutch a few times and
make sure the belt does not touch the belt guide in
any place when the drive mechanism is engaged.
VERIFICATION OF THE BELT AND PULLEY
ALIGNMENT:
Adjust the supports
Adjust the pulleys
WARNING
TO PREVENT INJURIES:
do this verification when the engine of the vehicle
is not running.
WARNING
TO PREVENT INJURIES:
It is the person who installs the drive mechanism
responsibility to make sure that when the clutch
is disengaged that all moving parts stop.
For more information, do not hesitate to contact
the technical support.
ASSEMBLY
Summary of Contents for Northeast 700576
Page 28: ...26 PARTS BREAKDOWN CHUTE...
Page 30: ...28 PARTS BREAKDOWN SNOWBLOWER...
Page 34: ...32 PARTS BREAKDOWN NORTHEAST DRIVE MECHANISM...
Page 36: ...34 PARTS BREAKDOWN SUBFRAME...
