Bercomac Northeast 700576, Owner'S Manual

Page: 10 / 44

8
NOTE: Use these same instructions for both
sides of tractor.
Manual Clutch:
Install the new belt guides (item A)
that are included with the drive mechanism on the
bottom carriage bolt (item 1). Place a 1/2’’ flat washer
(items B & C) over the belt guide and the top carriage
bolt. Continue with the handle support installation.
Electric Clutch: Do not install belt guides. Place a
1/2’’ flat washer (item B) over the bottom carriage
bolt. Continue with the handle support (left side)
installation and cab support (right side).
Install the handle support (item 2) on the left side and
the cab support on the right side as shown.
# Item Description Action
1 Carriage bolt
3/8 x 1’’ (qty 4)
Insert the bolts as
shown.
2 Handle / cab support Install as shown.
**3 Thread cutting screw
3/8 x1’’
See **
4 Flat washer 3/8’’
(qty 4)
Install as shown.
5 Flange nut 3/8’’
(qty 4)
Tighten the nuts.
6 Square head set
screw 5/16 x 1/2’’
Insert in the hole of
the handle.
7 Plastic grommet Insert as shown.
** Use this screw if the bottom hole is threaded.
ASSEMBLY
Install the handle support on left side
Install the cab support on right side