background image

2

 

 

 

 
 
 

LIMITED WARRANTY 

 
Revised 09-28-2011 

 

 

 

   

 

Conditions and Products Covered: 

 

BERCOMAC  guarantees  any  part  of  the  product  or  accessory 

manufactured  by  BERCOMAC  and  found  in  the  reasonable 

judgment  of  BERCOMAC  to  be  defective  in  material  and  or 

workmanship  will  be  repaired  or  replaced,  at  its  option,  by  an 

authorized dealer without charge up to our maximum labor rates 

and pre-established times.  For replacement parts only standard 

ground  freight  services  are  covered.   This  warranty  applies  to 

the products bought and used in North America.   

 

Warranty Period

  

(from date of the original retail purchase) 

 

 

Residential use:  1 year 

 

Semi-commercial, professional or rental use:  90 days 

 

Exceptions Noted Below; 

Despite the fact that the following 

items  are  considered  wear  parts,  they  have  a  different 

coverage condition and limited time:

 

 

 

 

Tire Chains:   

 

90 days, residential use 

 

No  warranty  for  semi-commercial,  professional  or 

rental use 

    Engines

: Will vary as per the manufacturer 

 

 

Please  refer  to  the  engine  manufacturer’s  warranty

 

  statement  included  with  the  unit.    BERCOMAC  is  not 
  authorized to handle warranty adjustments on engines.

 

 

Items and Conditions NOT Covered: 

 

This warranty does not cover the following: 

 

 

Pick-up or delivery charges or in-home services fees. 

 

Any damage or deterioration of the unit, parts and or finish 

of these due to normal use, wear and tear, or exposure. 

 

Cost of regular use or maintenance service or parts, such as 

gas, oil, lubricants, tune-up parts, and adjustments. 

 

Any  part  or  accessory  which  has  been  altered,  modified, 

misused,  neglected,  accidentally  damaged  or  not  properly 

installed, improperly maintained, vandalism, theft, fire, water 

or  damage  because  of  other  peril  or  natural  disasters, 

stored or repaired not in accordance with the instructions in 

the owner’s manual. 

 

 

Repair  due  to  normal  wear  and  or  any  wear  items  include 

but are not limited to items, such as shear pins, bolts, belts, 

winch cable, cutting edge, skid shoes, etc. 

 

Expedited freight fee services for replacement parts. 

 

Shear  bolts  and  shear  pins  are  to  be  considered  as  a 

preventive  measure  not  as  an  assured  protection,  any 

damages resulting from the lack of shear bolts breakage are 

not covered. 

 

Damages  due  to  product  being  installed  on  vehicle  other 

than stipulated in the owner’s manual

NOTE

:  All  warranty  work  must  be  performed  by  an 

authorized  BERCO  dealer  using  original  (manufacturer) 

replacement parts. 

 

Owner’s Responsibilities:

 

 

BERCO

’s defective equipment or part must be returned to an 

authorized  BERCO  dealer  within  the  warranty  period  for 

repairs.    In  the  event  that  defective  merchandise  must  be 
returned to manufacturer for repairs,  freight fees are prepaid 
and  a  written  authorization  either  BERCOMAC  or  KIMPEX 
must be obtained prior to the shipment.  This warranty extends 
only  to  equipment  operated  under  normal  conditions.    To 

validate  a  warranty  claim,  it  is  the  user’s  responsibility  to 
maintain  and  service  the  unit  as  specified  in  the  owner’s 

manual  or  to  have  the  unit  serviced  at  their  dealer  at  their 

expense.   

 

General Conditions: 

 

The sole liability of BERCOMAC with respect to this warranty 
shall  be  strictly  and  exclusively  repair  and  replacement  as 

mentioned herein.  BERCOMAC shall not have any liability for 
any other costs, loss or damage, including but not limited to, 
any incidental or consequential loss or damage. 

 
Taking advantage of the warranty does not in any way extend 

the length or renewal of the warranty. 

 

In particular, without being limited to, BERCOMAC shall have 
no liability or responsibility for: 

 

 

Travel time, overtime, after hour time or other extraordinary 

repair  charges  or  relating  to  repairs  and  or  replacements 
outside of normal business hours. 

 

Rental of  like  or similar replacement  equipment during  the 
period of any, repair or replacement work. 

 

Any communicating or travel charges. 

 

Loss  or  damage  to  person  or  property  other  than  that 

covered by the terms of this warranty. 

 

Any claims for lost revenue, lost profit or any similar costs 

as a result of damage or repair. 

 

Attorney’s fees.  

 

 

BERCOMAC

’s responsibility 

in respect to  claims  is  limited  to 

making the required repairs or replacement without charge up 
to  our  maximum  labour  rates  and  pre-established  times  and 

no claim of breach of warranty shall be cause for cancellation 
or  rescission  of  the  contract  of  sale  of  any  product  or 

accessory.  In no event shall recovery of any kind be greater 
than the amount of the purchase price of the product sold.  

 

This  warranty  gives  you  specific  legal  rights.    You  may  also 
have other rights, which vary from country to country

NOTE:  

Bercomac reserves the right to change or improve the design of any part or accessory without assuming any obligation to modify 

any product previously manufactured. 

 

Instructions for Obtaining Warranty Services:  

Contact the BERCO dealer where equipment was purchased or any other authorized service dealer to arrange service at 
their dealership. Requests for warranty claims must be carried out through the same distribution network used to 

purchase the product. 

Don’t forget to bring your proof of purch

ase (sales receipt) to the authorized dealer. 

 

Summary of Contents for 700580-4





































































































Reviews: