Berchtold CHROMOPHARE E 558 Service Manual Download Page 63

Page: 63 / 116

LED surgical lights, single and combination lights CHROMOPHARE

E 778, E 668, E 558

Connecting the electricity

NOTE!

Electrical installation must comply with the IEC
60364-710 European standard and the current
local standards.
Power switches and fuses must be installed by the
customer (for fuse values

appendix

) or the fuses

and fuse holder delivered must be used.
The cross-section of the connecting lines between
the fuses and the transformers must be at least
1.5 mm².

NOTE!

Detailed electrical plans may be requested from
technical service (

address on the inside of the

back cover of the manual).

NOTE!

Pay attention to the fuse ratings on the fuse
holders!

NOTE!

Fuses must be UL and IEC 60127 approved.

Summary of Contents for CHROMOPHARE E 558





















































































































Search results

Summary of Contents for CHROMOPHARE E 558

Reviews:

Related manuals for CHROMOPHARE E 558

Brands by name

Popular brands

Berchtold CHROMOPHARE E 558, Service Manual

Search results

Summary of Contents for CHROMOPHARE E 558

Reviews:

Related manuals for CHROMOPHARE E 558

Brands by name

Popular brands