Installing the device
48
Installation instructions
Create the installation cut-out
The installation cut-out must have the following
dimensions:
Description
Size
X
250 mm
Y
Full width of the bottom
cabinet between the framing
You need a saw for this work-step (e.g. jigsaw).
Ø
Protect all the surfaces of your working area from
damage, e.g. using thick cardboard or foam.
Ø
Cut-out the installation cut-out in accordance with the
dimensions specified for your device.
Installing the device
WARNING
Risk of injury from falling parts.
Ø
Ensure that no-one is below the working
area during the work.
WARNING
Risk of injury from falling parts if improperly
fastened.
Ø
Ensure that the cabinet has sufficient
bearing capacity.
Ø
Only use suitable fastening materials.
The supplied fastening material is only to
be used for fastening into a stable cabinet
(e.g. 16 mm wooden sheets). If there are
other installation conditions, you can ask
your architect for example, about
alternative fastening methods before
installation.
Ø
Ensure that the device is correctly
suspended.
ATTENTION
Damage caused by falling parts.
Ø
Protect areas and devices (e.g.
cooled cooking hob) underneath the
working area against damage, e.g.
using a thick piece of cardboard.
The device is suspended on two brackets. The
brackets are fastened to the cabinet by screws.
