16
17
CHECKING THE WATER FILTER
GENERAL PRECAUTIONS FOR USE
GENERAL PRECAUTIONS FOR USE (continued)
8. While the machine is running, do not cover it and do not place it in an cnclosed space with insufficient ventilation.
9. Do not leave the machine running for more than 5 minutes with the gun closed. Should it run for a longer period,
the temperature of the recirculating water will increase rapidly and could risk damaging the pump and pump seals.
10. When the machine is not in use, lock gun trigger in safe position to prevent it from being opened by accident.
11. For the sake of safety use only approved spare parts and accessories.
HOW TO USE THE VARIABLE NOZZLE
A) Selection of high or low
pressure by push-pull action.
The selection of the pressure
must be carried out with the gun
in closed position (1).
B) Adjustment from straight (4)
to fan (5) of water jet by simple
turning of the NOZZLE.
HOW TO USE THE DETERGENT KIT
The unit can suck and mix detergents and other liquid chemicals
thanks to an automatic device incorporated in the unit itself, which
is remote-controlled by operating the variable nozzle. The unit is
equipped with a chemical suction kit (Fig A).
- Fit the siphon hose into the chemical
injector and filter into chemical container
(Fig. B).
- Select low pressure with the variable
nozzle (Fig. C)
- At this point the suction and mixing of the
chemical will start automatically.
- When you wish to stop using chemicals in
order to clean or rinse, simply release the
gun trigger and adjust the variable nozzle
to high pressure.
- At this point the chemical injection
automatically stops.
- If you foresee not using the unit for a long
period of time, we suggest to clean the
chemical suction kit with clear water to
avoid chemical deposit build-up.
CHECKING THE WATER FILTER
It is important
to check the
filter before
using the
machine.
Remember that a
well-cleaned
filter means
good performance
and long life for
your machine.
Low pressure
High pressure
It is important to check the filter before using the
machine. Remember that a well-cleaned filter means
better performance and an extended life for your washer.
1. Keep the machine out of the reach of children.
2. High pressure water jets are potentially dangerous if used incorrectly. In particular,
the jet must not be directed against persons or animals, electrical equipment or
the machine itself. DO NOT USE the machine when persons and/or animals are
within the reach of the jet.
3. The user must operate the machine in safe conditions and situations avoiding any
situations of potential danger to themselves or other persons. In particular, the
user will have to:
- Avoid operating in unstable balance conditions.
- Remember that the high pressure jet generates a recoil when the gun is opened.
The force of this recoil is less than 3.0 pound-force.
- Use adequate protective clothing.
- Wear protective goggles and anti-slip rubber shoes.
- Avoid contaminating the environment with polluting, toxic or harmful substances.
4. This machine is build in compliance with the requirements of the current safety
regulations. The use of electrical appliances involves the respect of some basic
rules:
- Do not touch electrical parts or components.
- All operations of inspection, maintenance or repair must be made by qualified
personnel only. ALWAYS disconnect the plug before proceeding to any of the
above mentioned operations.
5. Do not pull power cord to unplug. Do not pull high pressure hose to move unit.
6. Before using the machine, inspect power cord to make sure it is not damaged. If
it is damaged, have it replaced by qualified personnel. Replace power cord only
with a cable of the same type as the original, this can be identified by the marking
on the outer sleeve. Do not damage or effect risky repair on power cord.
7. Before using the machine, inspect high pressure hose to make sure it is not
damaged. In case of replacement make sure the new hose has at least the same
specifications as the original. Technical specifications (maximum working pres-
sure, date of manufacture, name of manufacturer) must be marked on the outer
sleeve of hose.
8. While the machine is running, do not cover it and do not place it in an enclosed
space with insufficient ventilation.
9. Do not leave the machine running for more than 5 minutes with the gun closed.
Should it run for a longer period, the temperature of the recirculating water will
increase rapidly and could risk damaging the pump and pump seals.
10. When the machine is not in use, lock gun trigger in safe position to prevent it
from being opened by accident.
11. For the sake of safety use only approved spare parts and accessories.
OPERATION
OPERATION
