Automatic distributor of shoe covers Use instructions
4
Description of the product Fig. A
1. T-coupling for shoes covers
2. Lever
3. Main body
4. Base
5. Roll of shoes covers
Shoes covers installation Fig.B
Unroll a pack of shoes covers, without removing the strap that holds them together (Fig. B1 and Fig. B6)
Insert the “T” hooks in the appropriate coupling and press lightly (Fig. B2). The distance of 1 mm must remain
between one hook and the other (Fig. B5)
The shoes covers must be inserted diagonally (Fig. B3), following the indications of the previous point.
Repeat the operation on all four corners.
When you have completed the operation, remove the strap that holds the shoes covers together (Fig. B4).
Use Fig. C
Insert your foot in the centre of the main body.
Press with your foot down.
Remove the foot repeat the operation with the other foot.
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee ap-
plies to material and production defects. The purchase receipt and the guarantee certificate must be submitted
together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating
the date of purchase and the model of the appliance
For any technical assistance, please contact directly the seller or our head office in order to preserve the applian-
ce’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons
will automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we
guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs of use in consumable products
(such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any
defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of
the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not
attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of
charge.
In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable
part of the product, Beper reserves the right to replace only the very part in question and not the entire product
Contact your distributor in your country or after sales department beper.
which will forward your enquiries to your distributor.
Summary of Contents for C206UTI001
Page 2: ...2 Fig B 1 3 5 2 4 6 Fig C...
