21
Bentone
5.2 Servicing air dampers
Removal and installation
1.
Break the main current and disconnect the Euro plugs from the burner.
2.
Loosen the nuts (H) and pull the burner body out of the guides.
3.
Remove the intake grille at the air intake.
4.
Disconnect the damper motor.
5.
Clean the air damper (F) and the intake.
6.
Reconnect the damper motor.
7.
Install the intake grille for the air intake.
8.
Press the burner together and lock using the nuts (E).
9.
Fit the Euro plugs and turn on the mains power.
10. Check combustion*.
H
F
Note:
*
When servicing/replacing components that affect combustion, an
analysis and soot test must be carried out on the installation
!
If the burner is directly connected, ensure that all
components on the burner are without power.
Summary of Contents for B 80-3R
Page 29: ...29 Bentone 165 305 04 7 Electric equipment 7 1 Safety system...
Page 54: ......
Page 55: ......
Page 56: ...Enertech AB P O Box 309 SE 341 26 Ljungby www bentone se www bentone com...
