Bently Nevada 3500/93, Operation And Maintenance Manual

Page: 16 / 59

3500/93 SYSTEM DISPLAY
10
3.5 Independent Mount
1) Install conduit fittings to the independent mount housing.
2) Install the seal kit.
3) Install the independent mount brackets to the Display Unit using 10-32x0.37 Phillips pan
head screws (2 places).
4) Connect the cables.
5) Place the Display Unit on the housing, and use the seal washers, the flat washers and
the 10-32x0.75 screws to clamp down the Display Unit to make a seal between the
Display Unit and the Independent Mount Housing (4 places).
Mounting Hardware
Description Bently Nevada Part Number Quantity
Stainless Steel Independent Mount Housing 137835-01 1
3500/93 Independent Mount Bracket 137836-01 2
10-32x0.37 Phillips Pan Head Screw 04344178 4
10-32x0.75 Phillips Pan Head Screw 04344186 4
Neoprene Seal Washer 03810112 4
No. 10 Flat Washer 04281412 4
Conduit Fitting 0.75 NPT 03813103 1
Seal Kit 0.75 Hole 03838117 1