Bentel J408, Installation Manual

Page: 14 / 64

Description of Parts
This section describes the components of the J424 and
J408 Control panels, and J400-REP Repeater.
Unless otherwise stated, the numbers in boldface in this
Manual refer to the Tables ands Diagrams in this sec-
tion.
The parts identification numbers in the diagrams go cloc-
kwise. The white numbers refer to parts which are com-
mon to several of the system devices, therefore, are
described the first time they are encountered only.
P. Description
1 Surface Cable conduit entry
2 Zone label slots
3 Display
4 Door screws
5 Keyswitch (Access Level 2)
6 Display module (accessory item)
7 Expander Control board (LEDs and keys) of
Expander no. 2 (accessory item for J424 )
8 Flat cable (accessory item for J424 ): for the
Expander Control board connection
9 Main Control board (LEDs and keys) of zones
1 through 8
10 Expander Control board (LEDs and keys) of
zones 9 through 16 (accessory item for J424 )
11 Flat cable: for the Main Control Board connec-
tion (zones 1 through 8)
12 Anchor screw locations
13 Main board (2, 4 or 8 zones)
14 Chased cable conduit entry
15 Flat cable (accessory item for J424 ): for the
Expander Control board connection
14 Conventional Fire Panels J424/J408
C
NO
NC
9
32 32 28 27
11
Figure 3 Maximum configuration of the J408 Control panel