Option 3) Message playback time
The
message playback time
option establishes the length of time (20, 40,
60 or 80 seconds) that the message must run for each telephone number.
+
The
message playback time
should not be confused with the
alarm mes-
sage length
, in fact, the latter is specified in option 1. The above value
(length in seconds) will allow the message to be played several times.
+
If option 1 is set as "Short Common M 2 brief dedicated mes-
sages", and value
3
is set, the message length will be 8+16=24 seconds,
and will run for 60 seconds, that is, two and a half times: 60:24= 2.5 times.
Default setting
The default
message playback time
is 40 seconds.
To set the
message playback time
proceed as follows.
Access the programming phase ...
1
Press
a
.
a
è
2
Press
b
.
b
è
3
Press
3
.
3
è
4
Enter the required
message playback time
by
pressing one of the following keys:
1
= 20 s;
2
= 40 s;
3
= 60 s;
4
=80 s.
If 40 seconds is required select
3
...
3
è
5
Press
e
to confirm and quit.
e
è
Option 4) Dialling type
It is possible to select pulse or DTMF dialling, according to the local dialling
type, however, when possible select DTMF as it is faster than pulse dialling.
Default setting
The default setting is for DTMF.
26
Telephone dialler
B-TEL99
