Channel 2
To store alarm channel 2 telephone numbers, follow the entire procedure
for alarm channel 1, but at point
2
press key
2
.
Display
To view the stored telephone numbers, follow steps
1
,
2
and
3
of the tele-
phone number programming procedure, and then press
d
to display, in or-
der, the digits of the telephone number in the selected position; any 1 sec-
ond pauses will be indicated by
and 5 second pauses by
.
+
If the selected position is empty (no number) the display will show
.
Erase
To erase a stored telephone number follow steps
1
,
2
and
3
of the tele-
phone-number programming procedure, and then press
e
to confirm.
Alarm messages
The Alarm messages are sent to the programmed telephone numbers. The
B-TEL99 can store:
Ø
Two Dedicated Messages (16 seconds per message), one for each alarm
channel;
Ø
A Long Common Message (32 seconds) for both channels, according to
the setting of option n.
1
(see "
OPTIONS
").
Ø
A Short Common Message (16 seconds) for both alarm ch 2 brief
dedicated messages (8 seconds per message), one for each alarm chan-
nel (see "
OPTIONS
").
Default setting
The B-TEL99 message memory is empty (no default setting).
Figure 6
Alarm message: graphic illustration (see option n. 1)
PROGRAMMING
21
