Long Common Message - Short Channel 1 Message - Brief Dedicated
Channel 1 Message
The alarm channel 1 message/s is/are sent to the programmed telephone
numbers (max. 7), when the alarm channel 1 cycle is triggered.
Record
To record an alarm message for alarm channel 1 proceed as follows:
Access the programming phase ...
è
1
Press
b
.
b
è
2
Press
b
again.
b
è
3
Press
1
.
1
è
4
Press
e
to start recording.
e
è
.
5
Stand close to the microphone
5
(at approx.10 cm.) and,
for best recording results, record the message in a deep
tone of voice. *If option "
1
" is programmed as "Long
Common Message" (common to both channels) the
maximum recording time will be 32 seconds. In the
event of an alarm, the same message will be sent for
alarm channel 1 and alarm channel 2.
+
If option "1" is programmed as "Two Dedicated
Messages" the maximum recording time will be 16
seconds.
+
If option "1" is programmed as "Short Common
2 brief dedicated messages" the maximum
recording time will be 8 seconds.
+
The message countdown will be shown on the
display in divisions of ten 0 - 9 - 8 and so forth (0
stands for 10).
è
.
.
.
Playback
To playback the alarm channel 1 message proceed as follows:
Access the programming phase ...
è
1
Press
b
.
b
è
2
Press
1
to select the alarm channel 1message.
1
è
3
Press
e
to start playback.
e
22
Telephone dialler
B-TEL99
